ADCA Clean Steam Centrifugal Separator
When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency and the validity of the sterilization process can be compromised. S-11 series centrifugal separators remove moisture from steam pipelines. Steam passes through the separator and as a result of centrifugal forces, impact and swirling effects, separate the particles with a heavier specific gravity, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator, must be automatically drained by a suitable steam trap.
- 316L stainless steel construction.
- No moving parts.
- Self draining design.
|Sizes||1/2” - 2”|
|Max. pressure||10 bar|
|Material||- Body: 1.4404 (316L)
- Gasket: Viton
- Clamp: 1.4404 (316L)
|Surface Finish||Internal SF1|
|Certificates (standard)||3.1 material, 2.2 surface finish, FDA, USP Class VI 121 0C, 87, 88, 661, PED, TSE/ BSE|
|Certificates (optional)||3.1 surface finish|
Datasheet ADCA Clean Steam Centrifugal Separator
English - 960 kB - rev. IS S11.10 E 10.13