Bubble Trap
Pharmaceutical Bubble Trap
Bubble traps are used to detect and remove process gases in pharmaceutical and process applications.
Bubbles or gases can cause several errors in a process. Bubble traps make sure that unwanted process gases are detected and removed. They have been carefully developed with a minimum amount of crevices to help prevent the build-up of bacteria.
All threads are self-enclosed for easy wipe down, whilst shouldered tie rods ensure correct O-ring compression, making reassembly and maintenance simple. In addition, when installed in an upright position, the angled surfaces of our bubble trap encourage self-draining, making it easier to wash down the unit and ensure hygiene standards are maintained.
Options
- Alternative materials: Body: C22, Glass: Acrylic (USP Class VI)
| Sizes | 3" to 10" (for inlet and outlet sizes see datasheet) |
| Max. pressure | up to 7 bar (depending on size) |
| Temp. range | -50°C to 150°C |
| Connections | Tri-Clamp |
| Material | - Body: 1.4404 (316L) - Glass: 3.3 Borosilicate - O-ring: EPDM |
| Surface finish | Interior surfaces SF4 (for Base and Lid) |
| Certificates (standard) | 3.1 material, FDA, USP Class |
| Certificates (optional) | 2.2 surface finish |
ASME BPE Fittings
Tri-clamp seals & gaskets