DT-11c Concentric Reducer W x W

ASME BPE DT-4.1.3-1

FDC

The concentric reduced tube has a weld connection on both sides. These stainless steel tubes are manufactured from solid 1.4404 (316L) bar stock. This offers both excellent material properties and guarantees good controllable surface finishes.

These stainless steel tubes are available in ASME BPE sizes 3/8" to 6" and have a standard SF1 surface finish. SF4 surface finish is available on request. See table and datasheet for full range of sizes and measurements.

Technical information

Sizes	3/8" to 6"
Type of connections	Tri-clamp
Material	1.4404 (316L)
Finish	Interior Surfaces SF1, SF4 on request
Certificates	3.1 material
Certificates	2.2 surface finish

Availability (SF1)

Nominal sizes (inch)	mm	Length (mm)	Order Code
3/8" x 1/4"	9.53 x 6.35	41.3	FDC-03-WW-3-45-05*
1/2"x 1/4"	12.70 x 6.35	47.6	FDC-05-WW-3-45-02
1/2" x 3/8"	12.70 x 9.53	47.6	FDC-05-WW-3-45-03*
3/4"x 1/2"	19.05 x 12.70	54.0	FDC-07-WW-3-45-05
1" x 1/2"	25.40 x 12.70	63.5	FDC-10-WW-3-45-05
1" x 3/4"	25.40 x 19.05	54.0	FDC-10-WW-3-45-07
1 1/2" x 3/4"	38.10 x 19.05	76.2	FDC-15-WW-3-45-07
1 1/2" x 1"	38.10 x 25.40	63.5	FDC-15-WW-3-45-10
2" x 1"	50.80 x 25.40	85.7	FDC-20-WW-3-45-10
2" x 1 1/2"	50.80 x 38.10	63.5	FDC-20-WW-3-45-15
2 1/2" x 1 1/2"	63.50 x 38.10	85.7	FDC-25-WW-3-45-15
2 1/2" x 2"	63.50 x 50.80	63.5	FDC-25-WW-3-45-20
3" x 1 1/2"	76.20 x 38.10	108.0	FDC-30-WW-3-45-15
3" x 2"	76.20 x 50.80	85.7	FDC-30-WW-3-45-20
3" x 2 1/2"	76.20 x 63.50	66.7	FDC-30-WW-3-45-25*
4" x 2"	101.60 x 50.80	130.2	FDC-40-WW-3-45-20*
4" x 2 1/2"	101.60 x 63.5	108.0	FDC-40-WW-3-45-25*
4" x 3"	101.60 x 76.20	98.4	FDC-40-WW-3-45-30*
6" x 3"	152.40 x 76.20	184.2	FDC-60-WW-3-45-30*
6" x 4"	152.40 x 101.60	142.9	FDC-60-WW-3-45-40*

Declaration of compliance - Fittings
English - 142 kB - Rev0 - 2020

Datasheet ASME BPE Automatic Tube Weld: Concentric Reducer.
English - 268 kB - rev. D-4-20

Back to: ASME BPE Fittings

Downloads