ADCA Clean Steam Centrifugal Separator

When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency and the validity of the sterilization process can be compromised. S-11 series centrifugal separators remove moisture from steam pipelines.  Steam passes through the separator and as a result of centrifugal forces, impact and swirling effects, separate the particles with a heavier specific gravity, such as water droplets and moisture in suspension. The condensate collected at the  bottom of the separator, must be automatically drained by a suitable steam trap.

Main features

  • 316L stainless steel construction.
  • No moving parts.
  • Self draining design.
Sizes 1/2” - 2”
Max. pressure 10 bar
Max. temp. 200°C
Connections Tri-clamps
Material - Body: 1.4404 (316L)
- Gasket: Viton
- Clamp: 1.4404 (316L)
Surface Finish Internal SF1
Certificates (standard) 3.1 material, 2.2 surface finish, FDA, USP Class VI 121 0C, 87, 88, 661, PED, TSE/ BSE
Certificates (optional) 3.1 surface finish
Application:

pdfDatasheet ADCA Clean Steam Centrifugal Separator
English - 960 kB - rev. IS S11.10 E 10.13